Anklet Size Guide: How to Measure Your Ankle and Pick a Length
To find your anklet size, measure around your ankle just above the ankle bone, then add about 1 in (2.5 cm) so the anklet can move and rest on the bone. Most adult anklets are sold at roughly 8–11 in (20–28 cm), and many come with a short extender chain, so one anklet fits a range of ankle sizes. Kay Jewelers, for example, gives a typical range of 9 to 11 inches for anklets.
Below you’ll find a size chart, a step-by-step way to measure at home, how extenders and adjustable styles change the fit, and what the lengths in our own listings show. This guide is part of our jewelry size guide, which also covers necklaces, bracelets and rings.
Key Takeaways
- Measure just above the ankle bone with a soft tape or a strip of paper, and keep the tape snug but not tight.
- Add about 1 in (2.5 cm) to your ankle measurement for a relaxed fit, or a little less if you like it closer.
- An anklet listed as “8.3 in + 2 in extender” adjusts from 8.3 to 10.3 in (21–26 cm).
- As of October 2026, 21 of the 25 anklets in our catalog that list a length come with an extender; the most common is 8.3 in (21 cm) plus a 2 in (5 cm) extender.
- For larger ankles, look for a longer extender, a sliding-knot cord anklet or a base length of 9 in or more.
Anklet size chart
Use your ankle measurement to find the anklet length that will sit comfortably. The chart adds about 1 in (2.5 cm) of room, the same rule we use across our size guides.
| Your ankle (just above the bone) | Anklet length to look for | What to choose |
|---|---|---|
| Up to 7.5 in (19 cm) | About 8.3–8.7 in (21–22 cm) | A standard anklet; use the first links of the extender |
| 7.5–8.5 in (19–21.5 cm) | About 8.7–9.5 in (22–24 cm) | A standard anklet, clasped partway along the extender |
| 8.5–9.5 in (21.5–24 cm) | About 9.5–10.5 in (24–26.5 cm) | The last links of a 2 in extender, or a longer extender |
| Over 9.5 in (24 cm) | 10.5 in (26.5 cm) and up | An adjustable cord style or a long extender |
These are starting points, not fixed sizes. How snug you like an anklet is personal: some people want it to stay above the bone, others like it to slip down and rest on the top of the foot.
How to measure your ankle
You need a soft tape measure, or a strip of paper or string and a ruler.
- Find the spot. Anklets sit around the narrowest part of the leg, just above the ankle bone. Sit with your foot flat on the floor and relaxed.
- Wrap and mark. Wrap the tape or paper around your ankle at that spot. Keep it snug against the skin but not tight. If you use paper or string, mark where the end overlaps.
- Read the length. Lay the paper or string flat against a ruler and read it in inches or centimeters.
- Add room. Add about 1 in (2.5 cm) for a relaxed fit that moves a little, or about 0.5 in (1.3 cm) if you prefer it closer to the leg.
- Measure the ankle you’ll wear it on. If you plan to wear anklets on both sides, measure both and size for the larger one.
If you already own an anklet that fits well, lay it flat and measure it from the end of the clasp to the last link. That number is your anklet size.
For wrist sizing, which works in a similar way but with smaller numbers, see our bracelet size chart.
Standard anklet lengths
Anklets don’t have one fixed standard, but the lengths sellers use fall into a fairly narrow band:
- Kay Jewelers says anklets “can range from 9 to 11 inches” (Kay).
- Mejuri sells its fixed-length chain anklet in 9.5 in and 10.5 in, and advises sizing up for a looser fit (Mejuri).
- Fashion anklets often start shorter, at about 8–9 in, and use an extender to reach 10 in or more.
The base length tells you the shortest the anklet can be worn. The extender tells you how far it can grow. Always read both numbers.
How extenders work

An extender is a short length of chain attached to one end of the anklet. The clasp at the other end can hook into any link of the extender, so you choose how long the anklet is each time you put it on.
For example, our double chain leaf tassel anklet is listed as 8.3 in (21 cm) plus a 2 in (5 cm) extender. Clasped at the first link, it is 8.3 in; clasped at the last link, it is about 10.3 in (26 cm). By the 1 in rule, that covers an ankle of roughly 7.3–9.3 in (18.5–23.5 cm).
A few practical points:
- Clasp near the middle of the extender if you are between sizes. It leaves room to go up or down.
- The loose end hangs. On the longest setting there is no tail; on the shortest, the unused extender dangles, which most people don’t mind on an anklet.
- Larger ankles: if your ankle plus 1 in is longer than the base length plus extender, look for a longer extender in the listing or choose an adjustable style instead.
What the lengths in our anklet listings show
As of October 2026, our Anklets category has 40 ankle anklets, plus leg chains and shoe chains in their own sub-categories. 25 of those 40 list a length. Here is what they show:
| Length in the listing | Number of anklets |
|---|---|
| 8.3 in (21 cm) + 2 in (5 cm) extender | 12 |
| 8.7 in (22 cm) + 2 in (5 cm) extender | 5 |
| 8.3 in (21 cm), no extender | 2 |
| 7.9 in (20 cm) + 2–2.4 in (5–6 cm) extender | 2 |
| 8.3 in (21 cm) + 2.8 in (7 cm) extender | 1 |
| 6.3 in (16 cm) + 3.9 in (10 cm) extender | 1 |
| Adjustable cord | 2 |
So 21 of the 25 come with an extender, and 8.3 in plus 2 in is by far the most common combination. The two shortest base lengths reach about 10 in (25–26 cm) only on the last extender link, so check those if your ankle measures over 9 in (23 cm). The 15 listings without a length are mostly stretch, braided and toe-ring styles; for those, check the photos and the description before ordering.
From Lumi: When I compare anklets, I add the base length and the extender together before I look at anything else. If the longest setting is shorter than my ankle measurement plus an inch, I move on, however pretty it is.
Fit for slim and larger ankles
Slim ankles
If your ankle measures under about 7.5 in (19 cm), most standard anklets will fit on the first extender links. If an anklet without an extender feels loose, it will slide down onto the top of the foot. That can look nice, but it is more likely to catch on shoes. A shorter base length, such as 7.9 in (20 cm), gives a closer fit.
Larger ankles
If your ankle measures over about 9 in (23 cm), look for one of these:
- A long extender. Read the listing for the total maximum length.
- An adjustable cord anklet. A sliding knot adjusts across a wide range. Our patterned seashell cord anklet adjusts from 7.9 to 13.4 in (20–34 cm).
- A stretch anklet. It has no clasp, so check that it will stretch over your heel comfortably.

Anklets, toe ring anklets and leg chains

A standard anklet goes around the ankle only. A toe ring anklet (also called a barefoot sandal) runs from the ankle across the top of the foot to a loop on a toe. Size the ankle part as above, and check the listing for how the toe loop fits. Browse shoe chains and toe rings for these styles.
Leg chains and thigh chains are sized differently: they are listed by their full length or by the thigh band, so compare that number with your own measurement. See our leg chains for examples.
Anklets are usually worn with bare legs, sandals or low shoes, on one ankle or both. What an anklet means and which ankle to wear it on is a topic of its own, which we’ll cover in a separate guide.
Frequently asked questions
What is the average anklet size?
There is no single standard, but Kay gives a typical range of 9 to 11 inches, and Mejuri sells its chain anklet in 9.5 and 10.5 in. The most common length among our anklets is an 8.3 in (21 cm) base with a 2 in (5 cm) extender, which covers 8.3–10.3 in.
Should an anklet be tight or loose?
Slightly loose. You should be able to slip a finger under it, and it should move a little around the ankle. An anklet that is too tight can rub, especially in shoes.
Is an anklet the same size as a bracelet?
No. Anklets are longer, because the ankle is wider than the wrist. Brilliant Earth puts the average bracelet at 6.5–7 in for women and 7.5 in for men, while anklets typically run about 9–11 in. A bracelet usually won’t fit around an adult ankle.
How do I make an anklet bigger?
Clasp it further along the extender. If it has no extender, you can add a separate extender chain to the clasp, or choose an adjustable cord or stretch style.
Find your anklet
Measure above the ankle bone, add about an inch, and check that your number falls between the base length and the longest extender setting. Then browse all anklets by style. For the chain styles anklets are made from, see our guide to types of necklace chains, and for every other size, go back to the jewelry size guide.